Technologies For Innovation
Location:Home > PRODUCTS > Ball mills
High-energy ball mill PrepBM-01C
  • PrepBM-01C型高能球磨仪
  • 附件1
  • 附件2
  • PrepBM-01C型高能球磨仪
  • 附件1
  • 附件2

Overview:

The PrepBM-01C high-energy ball mill is mainly used for preparing laboratory samples with rapid and lossless fine grinding of hard, brittle and fibrous materials. The grounded sample shows itself in pleasant and uniform granularity, thus successfully meeting the granularity and homogeneity requirements of all kinds of samples.

Features:

 A variety of grinding jars for selection with adjustable speed.

 It is suitable for dry or wet samples such as solid particles, suspension and paste in various granularity.

 The minimum granularity can be up to 0.1 μm.

 Safety locking design of protective door to avoid misoperation.

 The chamber clamp is secured to avoid simultaneous rotation of the grinding balls and the grinding jar.

 The grinding jar is equipped with O-shaped sealing ring to effectively avoid dust.

 All the three devices, including the grinding jar safety locking device(three-point fixation), the inner security positioning system(cone bottom center positioning) and its surrounding three thick metal fixation devices, forcefully guarantee complete fixation and effectively prevent the grinding jar from loosening or sliding during the grinding process.

 Grinding jar and jar cover are provided with grip edge for easy operation; There is gap between the edge of the pot and the cover to facilitate opening.

 Temperature and pressure monitoring PTM system(optional) allows real-time online monitoring and analysis of changes occurring inside the jar during grinding (chemical reactions, phase changes, etc.).

Technical data:

Model

PrepBM-01C

Sun gear rotation speed

30-450rpm, valid sun gear diameter: 360mm

Rotation speed ratio

1:-2.2 (adjustable according to requirements)

No. of grinding stations

4/2, simultaneous grinding of 2,4 or 8 helpings of samples

Feed material

soft, hard, brittle, fibrous - dry or wet

Material feed size

12mm

Final fineness

Min. 0.1μm(depend on material of sample)

Material of grinding balls and jars

Stainless steel as the standard material, and other materials such as alloy steel, tungsten carbide, agate, corundum, nylon, PTFE, polyurethane, zirconium oxide, chromium steel

Grinding jar sizes

Depending on the material of grinding jars, various sizes for selection

Grinding jar volume

50mL80mL125mL250mL500mL

Voltage

AC 220V±10% 1-phase, 50/60Hz, 1.5KW

Dimensions(L×W×H)

550×360×450mm

Net weight

150kg

Application:

Sectors: geology, minerals, metallurgy, electronics, building materials, ceramics, chemicals, light industry, medicine, beauty, environmental protection, research institutes, etc..
Relative products: electronic ceramics, structural ceramics, magnetic materials, lithium cobalt acid, lithium manganese acid, catalysts, phosphors, long-afterglow luminescent powder, rare earth polishing powder, electronic glass powder, fuel cells, ceramic capacitors, zinc oxide piezoelectric resistors, piezoelectric ceramics, nanomaterials , circular ceramic capacitance, MLCC, thermistor(PTC, NTC), ZnO hypersensitivity, arrestor valve, strontium titanate annular hypersensitivity, ceramic filter, dielectric ceramic, piezoelectric transducer, piezoelectric Transformer, sheet resistance, thick film circuit, focal potential, oxidation Aluminum ceramics, zirconia ceramics, phosphors, zinc oxide powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite.
For more information or professional support, please call 4008-718-622 or email to info@ruishenbao.com.

Follow us

Whatsapp Public

Share to

Friendship link Contact us

+86 10-57374441
+86 136 8188 9743

info@ruishenbao.com

Whatsapp:+86 13681889743
Skype:+86 13681889743

Room1006,No.280,ShangZhongXiLu,Xuhui district,ShangHai,200237,P.R.China

+86 10-57374441
+86 136 8188 9743

info@ruishenbao.com

Whatsapp:+86 13681889743
Skype:+86 13681889743

Room1006,No.280,ShangZhongXiLu,Xuhui district,ShangHai,200237,P.R.China

Copyright 2013-2018 @ Ruishenbao Analytical (Shanghai) Co., Ltd 沪ICP备14013491号-1